How to Turn Off All Post-Processing on the DJI Neo 2
Peter Leslie
21 May 2026
If the clips off your DJI Neo 2 are reaching the edit looking too polished — over-sharpened roofs, smoothed-out foliage, waxy skin — the move is to back the in-camera processing out so the colour grade has something raw to work with. The settings that bake that look in sit inside the Style section of the Camera page in DJI Fly, and they only become editable once the camera is in Pro mode.
Most drone pilots hunting for the post-processing toggle want the same thing — a flatter, grainier, more neutral file that a LUT or a manual grade can lift in post without fighting the in-camera filter first. The Neo 2 will not give you a true raw mode, but Pro mode plus Sharpness at -2 and Noise Reduction at -2 is the closest the drone gets to leaving the sensor alone.
Quick guide
To turn off all post-processing on the DJI Neo 2, go to DJI Fly → Camera View → switch to Pro mode → top-right menu → Camera → Style → Sharpness -2 and Noise Reduction -2. Off at -2 leaves the most sensor detail and grain in the file for grading; the factory zero bakes a polished look that grade work cannot undo.
Step-by-step: How to Turn Off All Post-Processing on the DJI Neo 2
Follow these top to bottom the first time, and you will know the path off by heart the second time.
Switch the DJI Neo 2 camera from Auto into Pro mode
With the DJI Neo 2 powered on and the remote controller connected, launch DJI Fly and tap Go Fly to drop into the camera view. Tap the Auto label above the shutter button and pick Pro from the slide-out — the Style rows that hold the post-processing controls are locked behind Pro mode.
Open the DJI Fly settings menu from the camera view
With Pro mode active, tap the three-dot menu icon at the top-right of the screen to open the settings overlay. The settings panel slides in over the live feed with the category list down the left edge.
Select the Camera category from the left-hand list
The settings overlay opens with a column of categories down the left edge — Safety, Control, Camera, Transmission, About. Tap the Camera row to load the camera options into the right-hand pane. The right pane fills with collapsible section headers grouped by topic.
Scroll the Camera page down to the Style section header
Scroll the right pane down past the upper groups — exposure, video format, storage — until the Style section header comes into view. Style sits lower on the Camera page, below the rows you reach for more often during a flight. The header is collapsed by default and reads Style with a chevron icon at the right of the row.
Tap the Style header to expand the Sharpness and Noise Reduction rows
Tap anywhere on the Style row to expand the section. The chevron flips and four stepped rows slide into view underneath it — Sharpness, Contrast, Saturation, and Noise Reduction. Sharpness and Noise Reduction are the two rows that drive the in-camera post-processing.
Tap the minus control on the Sharpness row down to minus two
Tap the minus button on the Sharpness row repeatedly until the printed value reads -2. The four available steps are -2, -1, 0, and +1, so two taps from the factory zero is enough. This is the lightest in-camera edge enhancement the DJI Neo 2 allows.
Tap the minus control on the Noise Reduction row down to minus two
Drop to the Noise Reduction row at the bottom of the expanded Style section and tap the minus button until the printed value reads -2. The smoothing filter is now pushed as far back as the drone will allow and the most sensor grain reaches the SD card untouched.
Check the live preview behind the panel for the new flat look
The live feed sits behind the settings overlay and reacts as the values drop. With both rows at -2 the preview looks softer and grainier than the Auto-mode default — that flatter image is the raw-feel base a colourist can lift in post. If the preview looks too noisy for the kind of work on the day, the value can be nudged back up one step.
Close the settings overlay to return to the camera view
Tap the close icon at the top of the settings overlay, or tap anywhere outside the panel, to dismiss it and return to the full camera view. The new Sharpness and Noise Reduction values are stored on the drone and persist through the rest of the session — power-cycling the controller or the phone does not reset them.
Peter's tip
I run the DJI Neo 2 in Pro mode with both Sharpness and Noise Reduction at -2 whenever the footage is going to a graded edit. Yes, the live preview looks underwhelming on the phone, and the SD card files look soft and grainy played back raw — that is exactly the point. A LUT or a manual grade can add the bite back in cleanly, but it cannot strip baked-in sharpening or smoothing back out. For social-first capture that goes straight from card to feed I switch back to Auto and leave the Style values at zero.
Frequently asked questions
Does the DJI Neo 2 have a single off switch for all in-camera post-processing?
No. There is no master toggle that disables every processing pass in one tap. The closest you can get is Pro mode plus Sharpness at -2 and Noise Reduction at -2 inside the Style section of the Camera settings. The drone always applies some baseline image processing before the file hits the SD card — the Style rows simply set how aggressively that processing runs.
Why do I need Pro mode to turn off post-processing on the DJI Neo 2?
Auto mode locks the Style section behind the scene-aware automation that decides Sharpness and Noise Reduction for you. Switching the camera into Pro mode hands those rows back as manual stepped controls, which is the only way to dial them down to the minus two floor. Pro mode also unlocks the rest of the hands-on exposure controls — ISO, shutter, white balance — for grade-ready footage.
What does setting Sharpness and Noise Reduction to minus two actually do to the DJI Neo 2 footage?
Sharpness at minus two pulls the in-camera edge enhancement back so roofs, trees, and high-contrast horizons stop ringing. Noise Reduction at minus two tells the smoothing filter to leave the sensor grain mostly alone, which keeps fine texture in foliage, stonework, and skin. The combined effect is a flatter, grainier, more neutral file that a colourist has more room to push in post.
Should I turn off post-processing on the DJI Neo 2 for social-first clips?
Probably not. Sharpness at minus two and Noise Reduction at minus two look soft and noisy on a phone preview without a grade, and clips going straight to a vertical short on social need to read on a small screen with no edit pass. Leave the Style rows at zero for social-first capture and only drop them for footage that will be graded later.
Does the DJI Neo 2 keep the post-processing values between flights?
Yes. The Style section values are stored on the drone rather than the app, so Sharpness at -2 and Noise Reduction at -2 carry across to the next flight without resetting. Swap phone or remote controller and the same values are still in place. The only way to clear them is to tap the rows back up by hand or to run a full reset of the camera settings.
Can I switch off the DJI Neo 2 gallery retouch effects at the same time?
Yes — Skin Effects and Body Effects sit in a separate panel inside the DJI Fly Album. Open a photo or video full screen, tap the three-dot menu in the top-right, and switch off the Photo Retouching and Video Retouching toggles. That panel changes how DJI Fly renders the preview on the phone rather than what is baked into the file on the drone, so it pairs naturally with Pro mode Style for full-pipeline neutrality.
Will turning off post-processing on the DJI Neo 2 make low-light footage unusable?
It depends how much shadow grain you can stomach. Noise Reduction at -2 leaves the high-ISO grain that low light introduces, which is fine for a grade but can look harsh straight out of the drone. For dusk and twilight flying that has to grade together, step Noise Reduction up to -1 or 0 and treat the rest of the pipeline in post. For daylight, -2 across both rows is the safe default.
Does turning off post-processing change the DJI Neo 2 file format or size?
No. The codec, container, bitrate, and resolution are set elsewhere on the Camera page and are not affected by the Style rows. Sharpness and Noise Reduction only change how the image looks inside the same H.264 or H.265 file the drone is already writing. To squeeze the most flexibility out of the raw-feel pipeline, set the encoder to H.265 and the colour profile to the flattest option the firmware offers.
Turning off the post-processing on the DJI Neo 2 is less of a single switch and more of a recipe — Pro mode for the unlocked rows, Sharpness at -2 for clean edges, Noise Reduction at -2 for honest grain. Set those values once, leave them in place for any flight that feeds a grade, and bounce back to Auto when the next clip is a quick post to social.
If the DJI Neo 2 footage is still not grading the way you expect even with the Style rows pulled down, drop the details to peter@hiredronepilot.uk and I will come back to you directly. The video version of this walkthrough is on YouTube and the comments are open.
References
Primary source material for this article is the official DJI Neo 2 documentation and DJI Fly. External links open in a new tab.
- DJI Neo 2 — Downloads (User Manual, Quick Start Guide, firmware notes) · Camera settings overlay layout, Pro mode behaviour, and the Style section grouping that holds Sharpness and Noise Reduction.
- DJI Neo 2 — Specifications (UK) · Sensor and lens overview — the small sensor is the reason the in-camera processing has a visible job to do once the Style rows are at the minus two floor.
- DJI Fly — App download and release notes · The app where Pro mode, the settings overlay, and the Style section all live. Release notes record any changes to the Camera page layout between app versions.
Peter Leslie
Founder & GVC Drone Pilot
Peter is the founder of HireDronePilot. With thousands of logged commercial flight hours, he writes about drone technology, commercial surveying tactics, and UK aviation compliance.
Connect on LinkedIn